10 ft Crossmemberless Dump Body

Dump body of the month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which allows for increased body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

Dump Body of the Month – 17 ft Dump Body

Dump body of the month

WXL – Crossmemberless Dump Body

17 ft Dump Body

This months’s dump body of the week is a 17 ft dump body for Palm Peterbilt in Florida. This is one of ten units we are doing for this great customer. These crossmemberless dump bodies have several special features including strobe lights and a cap angle on the sides and tailgate.

17 ft dump body

This  17ft WXL has the following specifications requested by the customer:

WXL-17          DUMP BODY – CROSSMEMBERLESS – 17′

Yardage: 21/22

Floor Material: 1/4 AR450 HARDOX

Front / Material: 60″ 10 GA A1011

Side / Material: 56″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 7 GA A1011

Height: 58″

Slope: 6″

Chains: 5/16″

 

 

DB OPTIONS # 1

Cabshield: Full Width-3/4 (36″)

Asphalt Apron: 12″ Push Type

Bolt On: No

Lights: LED Standard

Oval S/T/T: (2) Per Post

Red & Amber Strobe**

DB OPTIONS # 2

Cap Angle Sides & Tailgate

(2) Rear Amber Strobes

(2) Mid Body Turn Signals

** 22″ Overhange for Paving **

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal w/air shift CW

Console: Air/Air

Mudflaps and Brackets: Yes

 

Delivery Fuel/Charges: No

PAINT

Color: Blue Metallic

PTO    POWER TAKE OFF

PTO Muncie CS Series (Auto)

W/ Overspeed Protection **

ALLISON 4500 RDS

TARP SYSTEM

Installation: Installed

Brand: Shurco

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: Yes

Tarp Size: 90″x19′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: Customer Supplied

Install @ 20″ center

Glad Hands: Customer Supplied

D Rings: Yes

Electric Plug: 7 way

This 17 ft dump body spec is setup for paving with a 22” overhang. They also have HARDOX AR-450 floors, making them versatile and easily used in a number of applications. Regardless of your application needs, we would be happy to quote your next dump body. We pride ourselves on our quality products and excellent customer service. Call us at (888) 734-4400 and let our dedicated sales team help spec your next unit!

16 ft WXR – Dump Body of the Month

Dump body of the month

Dump Body of the Month – WXR Series

New Warren Dump Body Model

This week’s dump body of the month features a NEW Warren dump body model – the WXR! This new dump body model has 12” radius coves inside the body to allow for easy dumping and a very strong floor. It is a cross between our WXL model and our WAR body, bringing the best of both models together. The WXR is a severe service dump body can be used for a variety of applications from asphalt to hauling heavy material*.

This unit is 1 of 3 that we completed for Christopher Truck Center in Greenville, SC.

This  16ft WXR has the following specifications requested by the customer:

BODY – WXR-16
Floor Material: 3/16 AR450
Front / Material: 60″ 3/16 A1011
Side / Material: 54″ 3/16 A1011
Horizontal Brace: Yes
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
Cab to Axle: 137.7

TAILGATE
Air Operated: Yes
Panel: 3 Horizontal
Material: 3/16 AR450
Height: 60
Slope: 15″
Chains: 3/8″
Standard opening tailgate
INSTALL
Hydraulic Hoses/Fittings: Yes
Pump: Permco 22 gal w/air shift CW
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Splash/Gravel Guards: Yes
Side Boards: Pine – 2×6

DUMP BODY OPTIONS # 1
Cabshield: Variable Width-1/2
(24″) x 90″ wide
Asphalt Apron: 8”
Center Board Pockets Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post

SPECIAL OPTIONS # 2
8” I-Beam longsills with rubber strip
Steel front mud guards installed
1 standard two rung ladder with 1 stirrup
Front, body side steps 24” wide

PTO POWER TAKE OFFWXR

PTO  – Muncie CS Series (Auto)

MISC MOUNTING NOTES
8” body setback
Pivot is 2” behind tires
22” overhang requested
Small round ICC under-ride bar
Rear flaps 6”-8” behind tires
Shovel holder on bulkhead

PAINT
Color: Warren Black

TARP SYSTEM TARP system – installed
Brand: Mountain
Manual / Electric: Electric
Type: Arm
Aluminum / Steel: Aluminum
Bent Arm: Yes
Tarp Size: 90″x16′
Tarp Type: Asphalt
Side Flaps: No

BEDLINER
1/2″ thick x 10′ wide QuickSilver liner installed on floor

WXR

This WXR was built to our customer’s specification, and we can build your next dump body to meet your specification! This body has the flexibility to be used in heavy duty down to medium/light duty applications depending on what material you choose. We would love to talk to you about your next dump body specifications! Call us today at 800-228-4842!

We will do a special feature of the new WXR series dump body shortly, displaying all of it’s great features and offered options.  Check the website soon for literature and details about the WXR series.

*different floor material may be recommended based on application

Demolition Dump Body – Featured Unit of the Month

Demolition Dump Body – Featured Unit of the Month

Dump body of the month

Dump Body of the Month

Demolition Dump Body

This month’s dump body of the month is a demolition dump body for Worldwide Equipment in Columbia, SC. This body was manufactured in Collins, MS, at our Warren, Inc. location and painted and installed in Columbia, SC. This body has a special paint job, including matching red fenders, which makes for a great looking truck and body combination!

demolition dump body

This body is a 16.5 ft WAR body mounted on a Kenworth T880 truck and has the below specifications.

Demolition Dump Body:

Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450
Side / Material: 48″ 1/4 AR450
Vertical Side Brace: No
Horizontal Brace: NoIMG_4910
Hoist / Cylinder: VTLW-74135

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 56
Chains: 5/16″
Double Acting: Yes
Standard
Water Tight: None

IMG_4911Installation:

Cabshield: Full Width-1/2 (24″)
Asphalt Apron: 8″ Push Type
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal PERMCO
Chrome Turnouts: Yes (1)
Side Boards: Pine – 2×8 painted
Covers: Aluminum

Color: RED
PTO Muncie TG8 Series

If you are looking for a new dump body, please call us at 888-734-4400. Also, be sure to visit our sister website www.dumptrucks.com for more information about all of our great dump body models. Whether you are looking for a light duty dump body or a very heavy duty dump body, we have the right model for you! We pride ourselves on being able to customize our bodies to your specific specifications.

Do not forget that Warren makes several different products, not only dump bodies. We also manufacturing dump trailers (both steel and aluminum), feed trailers and bodies, litter spreaders, lime and fertilizer spreaders, as well as aluminum dump bodies. For more information about each of our great product lines, please visit each website. If you have any questions, please call 903-379-3921!

18.5 ft Aluminum Dump Body

18.5 ft Aluminum Dump Body

Dump body of the month

Featured Dump Body

Dump Body of the Month – 18.5 ft Aluminum Dump Body

This week’s featured dump body is a 18.5 ft aluminum dump body for Worldwide Equipment in Columbia, SC. This is one of ten units purchased by Worldwide for one of their valued customers in Sumter, SC.  Their customer is a local South Carolina hauling company that was looking to expand their fleet. We are very excited to be part of their expansion! The units were manufactured in Plant City, FL, and was mounted at our Columbia, SC, location. Each unit is mounted on a Kenworth truck and has a water tight sealed tailgate.

18.5 ft aluminum dump body

18.5 ft Aluminum Dump Body Specs:

  • Floor Material: 1/4 ALUM 5083
  • Front / Material: 56″ .190 ALUM18.5 ft aluminum dump body
    5454
  • Side / Material: 48″ .160 ALUM
    5454
  • Vertical Side Brace: Yes
  • Tailgate: 9 PanelMaterial: .190 ALUM 5454
    Height: 56
    Slope: 6″
    Chains: 5/16″
    Water Tight: Yes with 4 aluminum winders (1) each side (2) under
    gatealuminum tailgate
  • Cabshield: Full Width-1/2 (24″)
    Asphalt Apron: 8″
    Center Board Pockets Yes
    Lights: LED Standard
    Oval S/T/T: (1) Per Post
  • POWER TAKE OFF
    Muncie TG8 Series

The winders featured on this aluminum dump body tailgate help to further secure the water tight seal. Winders can be put on steel and aluminum bodies with or without a water tight gate. We see many people on the coast who haul sludge add winders to their standard tailgates to further secure the tailgate with their high moisture content load.

To get a quote for your next aluminum dump body or steel dump body, please contact us at 800-228-4842. When you buy a Warren product you not only buy a quality product, but also a great customer experience.

For information on all of our dump body models, please visit our Dump Bodies product page on our sister website, dumptrucks.com. 

For more information about our aluminum dump bodies, please visit www.warrentrailers.com.