16 ft Dump Body – Featured Unit of the Week

16 ft Dump Body – Featured Unit of the Week

Dump Body of the Week

Dump Body of the Week

16 ft Dump Body

This week’s dump body of the week is a 16 ft dump body, currently located at Truckworx in Montgomery. This unit is perfect for everyday hauling and is currently FOR SALE! For information, visit http://www.truckworx.com/inventory/specsheet/?ID=11174955

viper red

Our frameless dump body is the original workhorse of the Warren dump body line. This steel constructed body has the following spec:

FL-16 – FRAMELESS 16’

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

Clear Backup: No

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Hardwood – 2×8

Covers: No

Wires in Conduit No

Delivery Fuel/Charges: No

PAINT

Color: Warren Black

 

PTO    POWER TAKE OFF

PTO Muncie CS Series for Allison

TARP SYSTEM

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hook: 30 Ton Rigid

Gladhands: Yes

D Rings: Yes

Plug: 7 Way

Call our dedicated sales representative to spec your next dump body at 888-734-4400.

16 ft dump body

Our dump bodies have continuous welding throughout for added strength and durability. This unit features a side swing tailgate, but we also offer standard tailgates, as well as air high lift gates.

All of our models can be customized to meet your specific needs. To learn more about our full line of dump bodies, please visit our sister website at www.dumptrucks.com/products/dump-bodies!

FL Series: Square Type Dump Body

FL Series: Square Type Dump Body

Dump Body of the Week

Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

 

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

 

PAINT

Color: Warren Black

 

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

square type dump body

 

 

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 888-734-4400!

Dump Body of the Month – 17 ft Dump Body

Dump body of the month

WXL – Crossmemberless Dump Body

17 ft Dump Body

This months’s dump body of the week is a 17 ft dump body for Palm Peterbilt in Florida. This is one of ten units we are doing for this great customer. These crossmemberless dump bodies have several special features including strobe lights and a cap angle on the sides and tailgate.

17 ft dump body

This  17ft WXL has the following specifications requested by the customer:

WXL-17          DUMP BODY – CROSSMEMBERLESS – 17′

Yardage: 21/22

Floor Material: 1/4 AR450 HARDOX

Front / Material: 60″ 10 GA A1011

Side / Material: 56″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 7 GA A1011

Height: 58″

Slope: 6″

Chains: 5/16″

 

 

DB OPTIONS # 1

Cabshield: Full Width-3/4 (36″)

Asphalt Apron: 12″ Push Type

Bolt On: No

Lights: LED Standard

Oval S/T/T: (2) Per Post

Red & Amber Strobe**

DB OPTIONS # 2

Cap Angle Sides & Tailgate

(2) Rear Amber Strobes

(2) Mid Body Turn Signals

** 22″ Overhange for Paving **

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal w/air shift CW

Console: Air/Air

Mudflaps and Brackets: Yes

 

Delivery Fuel/Charges: No

PAINT

Color: Blue Metallic

PTO    POWER TAKE OFF

PTO Muncie CS Series (Auto)

W/ Overspeed Protection **

ALLISON 4500 RDS

TARP SYSTEM

Installation: Installed

Brand: Shurco

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: Yes

Tarp Size: 90″x19′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: Customer Supplied

Install @ 20″ center

Glad Hands: Customer Supplied

D Rings: Yes

Electric Plug: 7 way

This 17 ft dump body spec is setup for paving with a 22” overhang. They also have HARDOX AR-450 floors, making them versatile and easily used in a number of applications. Regardless of your application needs, we would be happy to quote your next dump body. We pride ourselves on our quality products and excellent customer service. Call us at (888) 734-4400 and let our dedicated sales team help spec your next unit!

16 ft WXR – Dump Body of the Month

Dump body of the month

Dump Body of the Month – WXR Series

New Warren Dump Body Model

This week’s dump body of the month features a NEW Warren dump body model – the WXR! This new dump body model has 12” radius coves inside the body to allow for easy dumping and a very strong floor. It is a cross between our WXL model and our WAR body, bringing the best of both models together. The WXR is a severe service dump body can be used for a variety of applications from asphalt to hauling heavy material*.

This unit is 1 of 3 that we completed for Christopher Truck Center in Greenville, SC.

This  16ft WXR has the following specifications requested by the customer:

BODY – WXR-16
Floor Material: 3/16 AR450
Front / Material: 60″ 3/16 A1011
Side / Material: 54″ 3/16 A1011
Horizontal Brace: Yes
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
Cab to Axle: 137.7

TAILGATE
Air Operated: Yes
Panel: 3 Horizontal
Material: 3/16 AR450
Height: 60
Slope: 15″
Chains: 3/8″
Standard opening tailgate
INSTALL
Hydraulic Hoses/Fittings: Yes
Pump: Permco 22 gal w/air shift CW
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Splash/Gravel Guards: Yes
Side Boards: Pine – 2×6

DUMP BODY OPTIONS # 1
Cabshield: Variable Width-1/2
(24″) x 90″ wide
Asphalt Apron: 8”
Center Board Pockets Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post

SPECIAL OPTIONS # 2
8” I-Beam longsills with rubber strip
Steel front mud guards installed
1 standard two rung ladder with 1 stirrup
Front, body side steps 24” wide

PTO POWER TAKE OFFWXR

PTO  – Muncie CS Series (Auto)

MISC MOUNTING NOTES
8” body setback
Pivot is 2” behind tires
22” overhang requested
Small round ICC under-ride bar
Rear flaps 6”-8” behind tires
Shovel holder on bulkhead

PAINT
Color: Warren Black

TARP SYSTEM TARP system – installed
Brand: Mountain
Manual / Electric: Electric
Type: Arm
Aluminum / Steel: Aluminum
Bent Arm: Yes
Tarp Size: 90″x16′
Tarp Type: Asphalt
Side Flaps: No

BEDLINER
1/2″ thick x 10′ wide QuickSilver liner installed on floor

WXR

This WXR was built to our customer’s specification, and we can build your next dump body to meet your specification! This body has the flexibility to be used in heavy duty down to medium/light duty applications depending on what material you choose. We would love to talk to you about your next dump body specifications! Call us today at 800-228-4842!

We will do a special feature of the new WXR series dump body shortly, displaying all of it’s great features and offered options.  Check the website soon for literature and details about the WXR series.

*different floor material may be recommended based on application