15 ft Dump Body – Crossmemberless Design – Unit of the Month

Dump body of the month News

15 ft Dump Body – Crossmemberless Design – Unit of the Month

This month’s featured unit is a Warren WS-700 model, 15 ft dump body. Our WS-700 model is a crossmemberless body design, reducing weight and buildup under the body. This unit was manufactured at our Mississippi location and installed at Warren Truck & Trailer, LLC. in Talco, Texas. The WS-700 model has a versatile design. These bodies are built to haul aggregate, sand, or asphalt. The high tensile steel construction and unibody design make this a light weight, but still tough unit! We offer this in a variety of lengths and tailgate options. For more information on this model, contact your local Sales Manager.

This unit was manufactured for a customer in Wylie, Texas. This 15 ft dump body has the following spec:

Body:15 ft dump body
Yardage 14/16
Floor / Material 3/16 A1011
Front / Material 50″ 10 GA A1011
Side / Material 42″ 10 GA A1011

Tailgate:
Air Operated Yes
Panel 2 Horizontal
Material 10 GA A1011
Height 50
Slope None
Chains 5/16″
Double Acting Yes

Tow Package:
Pintle Plate 1″
Pintle Hitch 50 Ton
Pup rigging- yes

Special Options:
Diamond plate aluminum covers
Rubrails/Fenders/Lower tailgate

 

 

For more information on other Warren products, please visit our sister company websites:

  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
  • dumptrucks.com – Find information on all of our dump body models
  • fifthwheels.com – Find information on our hydraulic elevating fifth wheels

 

10 ft Crossmemberless Dump Body

Dump body of the month

Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which allows for increased body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers

Dump Body of the Month – 17 ft Dump Body

Dump body of the month

WXL – Crossmemberless Dump Body

17 ft Dump Body

This months’s dump body of the week is a 17 ft dump body for Palm Peterbilt in Florida. This is one of ten units we are doing for this great customer. These crossmemberless dump bodies have several special features including strobe lights and a cap angle on the sides and tailgate.

17 ft dump body

This  17ft WXL has the following specifications requested by the customer:

WXL-17          DUMP BODY – CROSSMEMBERLESS – 17′

Yardage: 21/22

Floor Material: 1/4 AR450 HARDOX

Front / Material: 60″ 10 GA A1011

Side / Material: 56″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 7 GA A1011

Height: 58″

Slope: 6″

Chains: 5/16″

 

 

DB OPTIONS # 1

Cabshield: Full Width-3/4 (36″)

Asphalt Apron: 12″ Push Type

Bolt On: No

Lights: LED Standard

Oval S/T/T: (2) Per Post

Red & Amber Strobe**

DB OPTIONS # 2

Cap Angle Sides & Tailgate

(2) Rear Amber Strobes

(2) Mid Body Turn Signals

** 22″ Overhange for Paving **

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal w/air shift CW

Console: Air/Air

Mudflaps and Brackets: Yes

 

Delivery Fuel/Charges: No

PAINT

Color: Blue Metallic

PTO    POWER TAKE OFF

PTO Muncie CS Series (Auto)

W/ Overspeed Protection **

ALLISON 4500 RDS

TARP SYSTEM

Installation: Installed

Brand: Shurco

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: Yes

Tarp Size: 90″x19′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: Customer Supplied

Install @ 20″ center

Glad Hands: Customer Supplied

D Rings: Yes

Electric Plug: 7 way

This 17 ft dump body spec is setup for paving with a 22” overhang. They also have HARDOX AR-450 floors, making them versatile and easily used in a number of applications. Regardless of your application needs, we would be happy to quote your next dump body. We pride ourselves on our quality products and excellent customer service. Call us at (888) 734-4400 and let our dedicated sales team help spec your next unit!